The advantage of the Green-GO communications system is that there is no single point of failure because there is no central unit that carries the entire system. A central matrix or routing engine is not required – you can very easily scale up your Green-GO network by simply adding more devices to it. Audio can easily be injected into the system and distributed to a group. The audio can be picked up by any device in the network that is interested in it. The Green-GO Beltpack X features a high-resolution full colour OLED display which shows information about channels, cue signals and the different functions that are operated by the four buttons on the front of the Beltpack. These buttons can be configured to provide instant access to up to four channels. Two rotary encoders are located on either side of the Beltpack X, making it suitable for both left- and right-handed users. By pushing the encoders, the Beltpack X can answer the most recent audio source. The encoders can also be programmed to control various other functions, e.g. one encoder can be set up for level control while the other encoder controls channel selection. All matrix data is held within the device. The Beltpack X is powered through a Power over Ethernet connector located on the back. Also located on the back is a 4-pin XLR headset connector.

Features

• 2, 3 or 4 Channel Mode
• Easily combinable with any other Green-GO Beltpack or Multi-Channel Station (no separate matrix or interface required)
• Powered through Power over Ethernet (802.3af-2003 standard)
• Intercom routing data, system setup & preferences are stored in local memory
• Create your own configuration with the free Green-GO Control software

Specifications

General:

• Connectors (Neutrik): 1 x XLR4M, 1 x RJ45 etherCON (10/100 Mbps)
• User controls: 4 x Buttons, 1 x Encoder Left, 1 x Encoder Right
• Display: 1 x 0,95" OLED screen (color)
• Display resolution: 64 x 96 pixel, 15 x 22 mm (H/W)
• Power inputs: Power over Ethernet: IEEE 802.3af 48-56 Vdc
• Power usage: 2 Watt typical, 5 Watt max
• Product Dimensions (H/W/D): 46 x 95 x 119 mm
• Weight: 261 g
• Environmental: Ambient temperature: 0° ‒ +55° C

Audio Inputs

• Connector (Neutrik): XLR4M (pin 1 & 2)
• Type: Unbalanced
• Bias power: Max. 2.5 V
• Amplification range: +30 dB ‒ +60 dB
• Noise: -70 dBu ‒ -55 dBu
• Wired Latency: Headset to headset: ~10 ms
• Wireless Latency: Headset to headset: ~22 ms (one wireless hop)

Audio Outputs

• Connector (Neutrik): XLR4M (pin 3 & 4)
• Nominal level: 0 dBu
• Max output: +20 dBU
• Impedance: 120 Ω