Rode NTG1 Shotgun Condenser Microphone
The NTG1's full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording.
Product Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | Supercardioid |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 139dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Power Options | +48V or +24V phantom power required from mixer or interface |
| Weight | 105.00g |
| Dimensions | 219.00mmH x 22.00mmW x 22.00mmD |
| Output | 3-pin XLR Output |
Original: $258.01
-65%$258.01
$90.30Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The NTG1's full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording.
Product Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | Supercardioid |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 139dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Power Options | +48V or +24V phantom power required from mixer or interface |
| Weight | 105.00g |
| Dimensions | 219.00mmH x 22.00mmW x 22.00mmD |
| Output | 3-pin XLR Output |
