✨ New Arrivals Just Dropped!Explore
HomeStore

sE Electronics X1 S Studio Bundle with Large Diaphragm Condenser Microphone, RF-X, Shock Mount and Pop Filter

Product image 1
1 / 3

sE Electronics X1 S Studio Bundle with Large Diaphragm Condenser Microphone, RF-X, Shock Mount and Pop Filter

Add new product Site Icon Edit with Elementor Essential Blocks Save draft Preview Publish 00/100  Type / to choose a block Toggle panel: AIOSEO Settings Toggle panel: Product short description Add Media Add Form Add OptinMonsterVisualText When sE introduced the X1 in 2010, it redefined what was possible for an affordable, hand-built condenser microphone. With best-in-class dynamic range and SPL handling, as well as substantially increased flexibility, the X1 S is more affordable than the original, yet an improved in every sense. With a handcrafted metal chassis and gold-sputtered diaphragms, plus 80/160Hz low cut filters and -10/-20dB pads, the X1 S provides all the control needed at an affordable price. When recording in an acoustically untreated room (bedroom, closet, etc.), Reflexion Filter® will help keep your signal clean by eliminating ambient room reflections. CUSTOM-DESIGNED, HAND-CRAFTED CAPSULE

Like its predecessor, the X1 S uses a hand-built condenser capsule carefully designed and tuned by engineers with decades of experience inside sE's capsule room. The result is a capsule built like the world's finest instruments, and a capsule worthy of capturing them.

HIGH-PERFORMANCE ELECTRONICS

Where the original X1 was powerful, the X1 S's reengineered electronics take its performance to the next level, allowing it to have the greatest dynamic range in it's class. The internal redesign provides increased sensitivity, dramatically improved SPL handling (up to 160dB!), and significantly reduced self-noise.

LOW-CUT FILTERS

-10dB and -20dB pad switches provide wide dynamic range, enabling a variety of applications and close mic techniques.

TWO SWITCHABLE ATTENUATION LEVELS

Two selectable low-cut filters at either 80Hz or 160Hz help remove low-end rumble and footsteps and compensate for bass buildup when using close mic techniques.

Specifications
  • Power
    • Electrical impedance: 125 Ohms
    • Recommended load impedance: >1k Ohms
    • Connectivity: 3-pin male XLR connector
    • Powering: 48V Phantom Power (P48 according to IEC 61938)
    • Current consumption: 6.0 mA
  • Sound
    • Capsule: Hand-crafted 1" True Condenser
    • Polar pattern: Cardioid
    • Frequency range: 20 Hz - 20 kHz
    • Sensitivity: 30 mV / Pa (-31 dBV)
    • Max SPL: 140 / 150 / 160 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz)
    • Equivalent noise level: 9dB
    • Dynamic range: 131 / 141 / 151 dB (0 / 10 / 20 dB attenuation pad)
    • Signal to noise ratio: 85dB
    • Low cut filter: 80 / 160 Hz, 6 dB / Oct, switchable
    • Attenuation pad: 10 / 20 dB, switchable
  • Dimensions
    • Mic diameter:
    • Mic length:
    • Mic weight:
  • What's in the box?
    • X1 S microphone
    • RF-X Reflexion Filter®
    • sE Isolation Pack (with pop shield)
    • 3m mic cable
Toggle panel: Product data Toggle panel: Product Popups Open document settings Open publish panel Product
$148.16

Original: $423.31

-65%
sE Electronics X1 S Studio Bundle with Large Diaphragm Condenser Microphone, RF-X, Shock Mount and Pop Filter—

$423.31

$148.16

Product Information

Shipping & Returns

Description

Add new product Site Icon Edit with Elementor Essential Blocks Save draft Preview Publish 00/100  Type / to choose a block Toggle panel: AIOSEO Settings Toggle panel: Product short description Add Media Add Form Add OptinMonsterVisualText When sE introduced the X1 in 2010, it redefined what was possible for an affordable, hand-built condenser microphone. With best-in-class dynamic range and SPL handling, as well as substantially increased flexibility, the X1 S is more affordable than the original, yet an improved in every sense. With a handcrafted metal chassis and gold-sputtered diaphragms, plus 80/160Hz low cut filters and -10/-20dB pads, the X1 S provides all the control needed at an affordable price. When recording in an acoustically untreated room (bedroom, closet, etc.), Reflexion Filter® will help keep your signal clean by eliminating ambient room reflections. CUSTOM-DESIGNED, HAND-CRAFTED CAPSULE

Like its predecessor, the X1 S uses a hand-built condenser capsule carefully designed and tuned by engineers with decades of experience inside sE's capsule room. The result is a capsule built like the world's finest instruments, and a capsule worthy of capturing them.

HIGH-PERFORMANCE ELECTRONICS

Where the original X1 was powerful, the X1 S's reengineered electronics take its performance to the next level, allowing it to have the greatest dynamic range in it's class. The internal redesign provides increased sensitivity, dramatically improved SPL handling (up to 160dB!), and significantly reduced self-noise.

LOW-CUT FILTERS

-10dB and -20dB pad switches provide wide dynamic range, enabling a variety of applications and close mic techniques.

TWO SWITCHABLE ATTENUATION LEVELS

Two selectable low-cut filters at either 80Hz or 160Hz help remove low-end rumble and footsteps and compensate for bass buildup when using close mic techniques.

Specifications
  • Power
    • Electrical impedance: 125 Ohms
    • Recommended load impedance: >1k Ohms
    • Connectivity: 3-pin male XLR connector
    • Powering: 48V Phantom Power (P48 according to IEC 61938)
    • Current consumption: 6.0 mA
  • Sound
    • Capsule: Hand-crafted 1" True Condenser
    • Polar pattern: Cardioid
    • Frequency range: 20 Hz - 20 kHz
    • Sensitivity: 30 mV / Pa (-31 dBV)
    • Max SPL: 140 / 150 / 160 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz)
    • Equivalent noise level: 9dB
    • Dynamic range: 131 / 141 / 151 dB (0 / 10 / 20 dB attenuation pad)
    • Signal to noise ratio: 85dB
    • Low cut filter: 80 / 160 Hz, 6 dB / Oct, switchable
    • Attenuation pad: 10 / 20 dB, switchable
  • Dimensions
    • Mic diameter:
    • Mic length:
    • Mic weight:
  • What's in the box?
    • X1 S microphone
    • RF-X Reflexion Filter®
    • sE Isolation Pack (with pop shield)
    • 3m mic cable
Toggle panel: Product data Toggle panel: Product Popups Open document settings Open publish panel Product
sE Electronics X1 S Studio Bundle with Large Diaphragm Condenser Microphone, RF-X, Shock Mount and Pop Filter | Mega Music