INTERFACE TO YOUR IRs The Suhr Reactive Load is the perfect link between your amplifier and computer audio recording interface. You can use the Reactive Load with your existing library of speaker impulse responses (IR) for the most realistic direct recording experience possible. REACTANCE IS THE KEY Traditional resistive load boxes will safely load your amplifier, but they also alter the tone, dynamics, and response of your amplifier. Real speakers do not have a fixed resistance across the entire frequency spectrum. Real speakers are reactive. The impedance curve of the Reactive Load has been painstakingly tuned to react like a speaker. Your amp will never know the difference. FEEL WHAT YOU’VE BEEN MISSING Unlike traditional resistive loads, the Reactive Load feels like you are still connected to a cabinet, retaining the warmth and dynamics of your amplifier. FLEXIBLE CONNECTIVITY The Suhr Reactive Load features a balanced or unbalanced line level output. The INPUT is optimized for the 8 ohm output of your amplifier and the THRU jack can be connected to a physical speaker cabinet. If a physical cabinet is connected to the THRU jack, the Reactive Load’s internal load is bypassed and the amp will see the load of the physical cabinet. SPEAKER INPUT IMPEDANCE: 8 Ohm DI / LINE OUT LEVEL: +4 dBu at 7 watts input, maximum level setting BALANCED LINE OUTPUT IMPEDANCE: Less than 6KΩ UNBALANCED LINE OUTPUT IMPEDANCE: Less than 6KΩ MAXIMUM RECOMMENDED INPUT POWER: 150 Watts RMS ROHS COMPLIANT: Yes DIMENSIONS: 8.8" (W) x 8.9" (D) x 3.6" (H) WEIGHT: 6.6lb